CS310 A

CS310 S is a PTFE-coated fabric with acrylic pressure-sensitive adhesive on one side. The acrylic adhesive provides high initial tack and enhanced solvent resistance. A blue backing liner is applied to the adhesive surface for ease of application and for identification. This product is typically used where good release at modest temperatures is required. Applications include platen coverings and linings of chutes and feed mechanisms.

Typical Properties*

Property

Metric

Imperial

Standard Widths

1000

39.4

Weight

470

g/m²

13.9

oz/yd²

Thickness

0.255

10.0

mil

Elongation

Tensile Strength

500 x 380

N/cm

286 x 217

lb/in

Trap Tear

PTFE Content

56%

Adhesive Type

Acrylic

*IMPORTANT: The values presented are typical values and should not be used for specification purposes.

More information available on technical data sheet:

Open in new tab

open_in_new

Rigorous testing standards

Versiv develops custom application testing based on each of our partner’s product uses in order to create the best possible solution. Some tests that are included but are not limited to environmental, durability, and reliability testing to give you peace of mind making sure that products work in the hardest environments. Our testing begins during the co-development process to develop relevant tests and gather data that allows us to create market-ready solutions quickly.

Some of our tests:

FTMS 191A-5041
FTMS 191A-5030
FTMS 191A-5102
FTMS 191A-5136
ASTM D149-81